findmyterew.blogg.se - Pl2303 prolific driver v1.8.0

#Pl2303 prolific driver v1.8.0 install
#Pl2303 prolific driver v1.8.0 serial
#Pl2303 prolific driver v1.8.0 drivers

Select the COM Port you want from the drop down menu and click OK.

#Pl2303 prolific driver v1.8.0 serial

In Device Manager, right click “USB Serial Port”, click on Properties, Port Settings and click on Advanced.

Some diagnostic software can auto detect the COM Portbeing used. Windows 98 and Windows ME driver support is discontinued and is no longer provided.

Run PL2303 CheckChipVersion tool program in Windows XP/Vista/7 to check chip version.

#Pl2303 prolific driver v1.8.0 install

STEP 5: You are now ready to install the Diagnostic Software you prefer to use.Īdjust COM Port Settings (Optional): Depending on the diagnostic software you use you may need to change theCOM Port Number to match the port range in the software. Windows 8/8.1 are NOT supported in PL-2303HXA and PL-2303X EOL chip versions. If the driver was installed successfully, no yellow exclamation markwill be shown

Look for the device called “USB Serial Port”.

Look for the Ports (COM and LPT) directory and arrow on the left to expand the directory.

(Tip: You can type “DeviceManager” in the Windows search bar if you cannot find the Device Manager. Windows 8/8.1 are NOT supported in PL-2303HXA and PL-2303X EOL chip versions.

Go to your Windows CONTRL PANEL, then navigate to the DEVICE MANAGER.

Run or double-click the PL-2303 Windows Driver Installer v1.5.0 program. Check if PPL-2303 USB-to-Serial (version 1.7.0) is installed. So far we haven't seen any alert about this product. PL2303HXA/XA Windows 8 Update Driver Installation - 4 of 12 - 4. We have seen about 19 different instances of PL2303ProlificDriverInstallerv1.8.0.exe in different location.

#Pl2303 prolific driver v1.8.0 drivers

STEP 4: Check if the Drivers were installed successfully. What is PL2303ProlificDriverInstallerv1.8.0.exe PL2303ProlificDriverInstallerv1.8.0.exe is known as InstallShield and it is developed by Macrovision Corporation. Windows will recognize the cable andconnect it with the drivers that we installed prior.

STEP 3: Plug the ELM327 Scanner’s USB cable into your PC’s USB port. This will install the drivers required for the ELM327 USB Scanner. Run the application “PL2303_Prolific_DriverInstaller_v1.8.0” and follow thesteps to complete the driver installation. STEP 2: Open the extracted “ELM327-USB-PL2303-V1.5” folder and open the folder“PL2303_Prolific_DriverInstaller_v1.8.0”. With 7-Zipinstalled, right click on the compressed folder, navigate to Z-Zip and click on Extract to “ELM327-USB-PL2303-V1.5”. STEP 1: Download the ELM327-USB-PL2303-V1.5 Driver Pack from the Downloads page on our website. File Extraction Software:We recommend Z-Zip.Fixed teraterm timeout/slow response issue. ELM327 USB Scanner v1.5 with Prolific PL2303 Driver Change from v3.4.48.272 (Driver Installer v1.8.0 & 1.8.19): Driver will delay 1.5ms when AP execute GETMODEMSTATUS.